❄️ Elevate your build with the coolest case on the block!
The ANSAITE W9 Mid-Tower Gaming PC Case features 9 pre-installed PWM ARGB fans for superior cooling, dual 4mm tempered glass panels with easy access, and a front I/O panel with Type-C and USB 3.0 ports. Designed for versatile motherboard compatibility and high-end component support, it offers advanced cable management and supports up to a 360mm radiator, making it a perfect choice for gamers and professionals seeking both style and performance.
Number of USB 2.0 Ports | 2 |
Number of USB 3.0 Ports | 1 |
Brand | AMANSON |
Series | W9 |
Item model number | W6 |
Item Weight | 21.3 pounds |
Product Dimensions | 16.5 x 15.9 x 12.2 inches |
Item Dimensions LxWxH | 16.5 x 15.9 x 12.2 inches |
Color | WHITE |
Manufacturer | AMANSON |
ASIN | B0CP65CRST |
Date First Available | November 29, 2023 |
D**S
Looks great and works perfectly!
My husband loves this for his gaming computer! It was the perfect size to fit all of his gadgets. It fits perfectly on his desk and looks very cool!
P**N
Best PC Case
Great case, I think it's better than the nzxt flow case.
M**V
Overall, nice case but with some issues
Pros:Looks very nice.Comes with 9 fans.Fits ATX motherboards (barely)Airflow is good (if you switch all fans around)Cons:Cheap RGB fans.Cable management is a nightmare because of the limited space on the second chamber.All fans installed backwards.A bit bigger than the original design brand. Not a big issue but think you will need a bit of extra space on your table.No dust filter on the side (where the fans sit).Glass is a fingerprint magnet.Other thoughts:It is obviously a close design to a more expensive case, but overall, the look is great. The first thing that you will see is that all fans were installed backwards. So, I adjusted that quickly. Then my motherboard does fit, but the connectors at the bottom were very tight. I would recommend that loosen up the fans at the bottom first, then put all connectors, and then remount the fans. Tested IO at the front and it worked well.RGB fans are terrible. The do work, but you can tell that the brightness, led distance and light diffusion are not that good. In my case, my motherboard did not come with the 3-pin connector, so I had to use a controller. My air intakes are at the bottom and the side, and my exhausts are on top and back. Since I am using an AIO with 2 fans, I changed the 2 fans with the top 2 fans and moved the 3rd fan from the top to the back. So, airflow is good on the case. I wish it also had a dust filter on the side.So, overall, it is a nice case. Just be aware that you may have some extra work to address some of the issues. In my case, I was able to get everything working, and for less money than if i would have gotten the known brand case.
S**L
Buy the ShakingTank ARGB and PWM Fan Hub Controller,9 Ports Case Fans Hub
This is very nice case for the price have plenty of room, also love the fact it has 9 color fans, they are a little noisy, but really can't here them until you shutdown... Before you purchase this case pick this Case. You must purchase the caseShaking Tank ARGB and PWM Fan Hub Controller,9 Ports Case Fans Hub with Controller and SATA Power Input, Magnetic backplane Splitter 5V/3PIN RGB Case Fan Hub The case doesn't come with one!!!
Z**L
Do not buy this! Terribly designed! Important info at the end too.
Most notably, you’re probably going to have to take all the fans out and orient them properly, especially if you’re installing an AIO liquid cooler. They all came installed as exhaust! So dumb! So i installed the fans that came with my IOA in the top as the same orientation so you could avoid a bit of work if you just have a stock cooler/ air cooler. BUT EVERY OTHER FAN U WILL HAVE TO FLIP AROUND. If you leave them as is, you will have massive dust problems because with all fans exhausting, air will come in through openings without dust filters on them. 9 fans 3 sets of 3 is just dumb in the fist place if you have 2 sets intaking and 1 set exhausting theres going to be a lot of positive pressure. I recommend also installing a fan at the back for exhaust, I used one from the top that i replaced with my AIO fans. I literally had to take out every single fan and orient it properly. Just a nightmare and a lot of extra work.Also cable management is quite the endeavor with this many fans. And you probably dont even need this many fans so you’re waisting a bit of money on looks.Oh and one last thing, the case is a bit smaller that i thought it would be, was a little tricky getting a full size ATX mobo in there.
J**R
Great alternative to other panoramic cases
Metal is a little thin but not in an awful way. Matte finish scuffs easily but paint seems durable. Mine came with broken front glass and amazon got me a replacement case shipped out immediately. I built in the original and swapped out the front glass. The fans are quiet, nice and bright and move decent amount of air but all fans moving air out of the case was a problem. I turned the top fans over to create some type of intake. I did the top fans for aesthetic reasons. To keep the easily seen fan faces showing. Not the best setup for thermals, flipping bottom fans would have been better but would have looked worse. It works well and looks amazing. Gets a lot of attention.
J**B
Cool looking case... AWFUL building experience READ BEFORE YOU BUY
Let me start off with the Good things about this case. It looks AMAZING! Thats where the good things end...This has got to be the worst case to build in and has so many flaws to it. First thing I noticed when I first got the case was it has a swinging door to open, which is okay? Personally not a fan and wish I knew before I bought it and maybe some people will like it. It is removable too. 2nd thing I notice is there is ZERO dust filters in this case, which to me is absurd.I also noticed that this case is different from other reviewers which is totally odd?Build Quality is okay, it's Not good but it's also not bad. My case only holds 9 fans, you can not put a 10th fan in the back unless you want to drill holes in the case. The GPU brackets are the type you break off and can not re-screw.Now the absolute worst part of this case, building in it. IVE NEVER SEEN A CASE WHERE YOU HAVE TO INSTALL THE HARD DRIVE BEFORE YOU PUT THE MOTHERBOARD IN. The screws to put the hard drive in is right behind the motherboard and Ive had to at-least take the motherboard off 3 times because the way you mount this hard-drive, the connectors are FACING THE WALL, making it impossible to plug in the SATA power cable without installing it in with the hard-drive! Cable managing in the case is terrible. You WILL have a rats nest no matter how hard you cable manage. Theres also a extra mount for sdd's that right in the middle of where you would cable manage and it's an absolute pain.Overall I give it like a 5/10 because the looks make up for a day of headache. Out of all the PC builds Ive done, this one build took me 10+ hours to do where it would normally take me at-least hours. If you are looking for a Lian-li type case, Id personally look somewhere else or just spend the extra $50. Trust me, I wish I did...
C**E
Great airflow
Beautiful case for a pretty good price.
Trustpilot
1 day ago
2 months ago