Pébéo - Special Siligum Mould Creation Paste - Silicone Moulding Paste, Small Dimensions & Flat Decorations - Silicone For Moulding, Very Quick Setting - 300 G,White (Packaging may vary)

I have only just received this (ordered after being inspired by a video on Insta). I couldn't wait to try and make my own moulds so at midnight last night I made a couple of shell moulds then pressed airdry clay into them. Amazing and, of course, being a silicone mould it's flexible enough to pop your creation out (with air dry clay, PMC etc do this straight away).Your new mould will set in about 5 mins and you leave your 'model' in for this long. I have a mental list of things to make moulds of now and what I want to do with them...I used one of those little spatulas for cosmetics as I only needed a little bit of the goo - it won't start to set until mixed so it's easy to put a little bit of white next to a little bit of blue to make sure you have equal amounts. Then it's very quick and easy to combine and it's so tactile!The pots are a bit bigger than I expected so great value, and you can reuse your new moulds loads of times. I even used the back of the packaging as a work board which was handy too.

I use this often to make unique moulds from natural finds.For example acorns have worked really well.It's very easy to use, simpleix equal amounts of each colour, mix between your fingers, and use. Be warned that it definitely sets quickly, you maybe have five minutes, a bit longer, to play around with it.There are only small amounts in the pack, but I get several small moulds from that.Happy to recommend.

Accurate, fast setting, easy to use, but expensive

Used this to copy some moulding on an old ornate picture frame and then, using plaster of paris, to replace some damaged sections of the same frame.Was sceptical at first about how easy it would be, but, having watched a few videos of professionals, found it worked very well. Not bad for a first attempt.Instructions about mixing and applying SILIGUM are clear and I followed them to the letter.

I love this stuff, it is absolutely perfect for mould making. It’s always my go to.

Whilst decorating recently we came across a very challenging situation. Some decorative (swags and tails and lots of fine detail) coving had been badly damaged by the previous occupier of the house whilst putting up a pelmet. Effectively a metre long piece of the plasterwork was completely missing and leaving a big ugly gap in its place. There was an option to buy more coving and replace this section, but it was only sold in packs of 5 X 2 metre lengths. Remembering having seen a programme on TV where someone was repairing delicate plasterwork by copying the pattern in a mould and creating a replacement section, I thought I'd give it a go. Having done lots of research I bought the Siligum moulding paste and Restoration plaster from Amazon. The moulding paste is a doddle to use. Simply mix equal measures of the white and the blue pastes together to form a light blue paste (similar in look and feel to blu tack) and away you go. I moulded a section of good coving about a foot long first. The paste cures in about 10 mins ( I left it about half an hour) and came away from the coving cleanly, leaving no residue. You do need to make sure that you work the paste well into any gaps so that you don't end up with holes in your mould.I ended up with a flexible strip of moulding material with a perfect mirror image of the coving I'd moulded. The next bit was the most difficult - clamping the mould to a flat edge so the plaster could be poured. Once done though the resulting plaster cast was an absolutely perfect match (and fit). I reused the mould another couple of times with no problems to make sufficient length to complete the job (I'm sure I could have probably reused it a dozen times or more if I'd need to). Having done a little bit of trimming, fastened the plaster to the wall with a bit of 'no more nails', filled the odd gap and painted it, you literally couldn't tell there was ever a gap there at all.I'll see if I can add some pictures to this review to show the before and after. I'm really happy with the product and more than a little impressed by my own handy-work (which, believe me, is usually pretty cack-handed).

Sets firm and peels away too.

This product is very simple to use. Just role and mix the two colours in your palm and press down onto the profile.In 5 minutes it can be lifted and the impression of the indent is cleary seen . Fill the impression with epoxy resin kit (Amazon) and leave for 12 hours in a warm place. Pull back the rubber Pepeo mold to release thesolid resin shape.